Aufklaerungspanzer 38(t) mit 7.5 cm Kw.KReviewed by Cookie Sewell
|
Stock Number and Description | Dragon Models Limited (cyber-hobby.com) 1/35 Scale ‘39-‘45 Series Kit No. 6310; Aufklaerungspanzer 38(t) mit 7.5 cm Kw.K |
Scale: | 1/35 |
Media and Contents: | 810 parts (480 in grey styrene, 240 "Magic Track" links, 71 etched brass, 19 clear styrene) |
Price: | estimated price US $41-45 |
Review Type: | First Look |
Advantages: | Interesting little vehicle based on DML's "Smart Kit" and "mix and match" from other kits |
Disadvantages: | one-off prototype |
Recommendation: | Highly Recommended for all THNP series fans and German modelers |
FirstLook
Towards the end of WWII the Germans began an odd sort of
standardization as they began to try and get similar performance and
capabilities from light vehicles in view of a constantly worsening
situation. It appears that reconnaissance vehicles were one of the
beneficiaries of this concept, as they went from open turrets with 2
cm guns to open casemates with 7.5 cm short guns. While not giving
them great antitank capability, it did permit better fire support
for general purpose missions.
Derived from the older Sd.Kfz. 233 close support howitzer, the
wheeled version of the scout vehicle fitted in this manner emerged
as the Sd.Kfz. 234/3. (The half-tracked versions, the Sd.Kfz. 250/6
and Sd.Kfz. 251/9, were designed to provide close support and not
reconnaissance functions.) A tracked vehicle was designed to provide
a fully-tracked scout vehicle based on the obsolete Pzkw. 38 (t)
Ausf. G chassis. Only a single prototype of the latter was built. It
was to provide reconnaissance capability to the Hetzer units as well
as the Jagdpanzer 38(d) follow-on variants.
Dragon has now produced a model of this little vehicle with the
participation of its cyber-hobby.com affiliate. Based on their
excellent Pzkw. 38(t) Ausf. G "Smart Kit," it plays "mix and match"
with some of the parts of that kit. 85 parts have been dropped, and
another 245 added from other DML offerings with the majority of
parts coming from the Sd.Kfz. 234/3 and Pzkw. IV Ausf. B-E kits. A
single sprue of dedicated parts for this vehicle, covering its
casemate and distinct details, has been added.
As with the previous effort, this kit provides the correct drive
wheels with the excellent suspension as well as different springs
for the bogie assemblies. Assembly follows the earlier kit and is
pretty straightforward. However, the back plate (part B40) is one
piece so the access cover cannot be shown open or removed, as in
performing maintenance on the engine.
One area in which DML was "dinged" on the Marder III kit was the
fenders. I have to say that having sat down with a number of photos
of the TNHP tanks and a straightedge most of them seem to have come
out of the factory with dead straight fenders. But once in service,
whether it is crew use or track slap or something else, the front of
the fenders from the center of the vehicle onward appear to take on
a slight bend upward from the rear section. It took me a good ten
minutes with this kit as I had to take out the fenders and check
them but they appear to have a one or two degree up angle molded
into them (and are specifically flagged as from DML Kit No. 6396, so
would bet more kits will be forthcoming). However, the mounting
flanges for the fenders on the sides of the hull are arrow straight
so no idea how this will work on the model. But since the one photo
apparently readily available shows the vehicle sans tracks, there is
no way of saying how they actually mounted on this variant.
Tracks are the DML "Magic Track" links, which are identical so do
not have to be "handed" as with other kits. These even have casting
data molded into them, but in my case it took a 10x jeweler's loupe
to confirm it!
The forward part of the interior is pretty much complete as near as
can be seen, and as it has an open top will not need an "IPMS Death
Ray" (penlight) to see most of the central bits. The engine
compartment is pretty much ignored and few of those parts are used;
also the engine itself is now gone.
As it was a prototype, only one finishing option is provided, and
that is basic armor yellow overall. No decals are provided.
Overall, DML has done a good job of a one-off prototype. But as it
was a one-off, perhaps when they do these in the future they should
consider fans of what is called (happily or derisively, depending on
point of view!) "Panzer ‘46" modeling and provide some suggested
paint schemes and generic markings for very late war vehicles.
A 70 Pzkw. 38(t) wheels and
suspension
B 70 Pzkw. 38(t) Ausf. G fenders and hull components
D 59 Pzkw. 38(t) interior and transmission components
E 1 Pzkw. 38(t) Hull
g 4 "Star" antenna
H 42 Pzkw. 38(t) Ausg. G alternate details
H 34 Pzkw. 234/3 interior details
J 14 clear styrene vision blocks
J 36 Pzkw. 234/3 7.5 cm gun details and ammunition
K 18 Pzkw. 38(t) OVM
L 19 Pzkw. IV Ausf. B-E L/24 gun details
P 17 Engine and accessories
T 17 Aufklaerungspanzer 38(t) casemate and details
Y 240 Magic Track
GA 64 German Gear A sprue (helmets, canteens, bayonets, mess kits,
gas masks)
WC 29 German Weapons C MG-34 and detail parts
MA 59 etched brass
MB 12 etched brass
Thanks to
Freddie Leung for the review sample.